Loading…

 2020 MEET CANCELLED

"NEW NOTICE" Since Model A Day has been canceled, The Four Points Sheraton, who was our Host Hotel, considers all reservations canceled. If you still plan to visit the museum the weekend of September 18-19, you will need to contact the hotel directly to re-reserve your room. (269) 385-3922. They will give you the best available rate possible. If you had hotel reservations at any other hotel, you are responsible to cancel these. We apologize for this inconvenience.

The Pine Tree A's have decided to cancel the 2020 New England meet.

Instead it has been moved to Sept 10-12, 2021. It will be held at the same facility at Sunday River and we will visit the Bob Bahre collection on our Saturday tour.  Jon Harris and David White, co chairs, 2020 NE Meet

model a

PINE TREE CHAPTER MODEL A FORD CLUB OF AMERICA.

model a

MAFCA 2020 International Convention CANCELLED.

YOUTH RESTORATION PROJECTS

PINE TREE CHAPTER MODEL A YOUTH RESTORATION PROJECT The Pine Tree Model A Ford Club of Maine has started a Model A Youth Restoration Project. We are doing a frame-off restoration of a Ford Model AA Dump truck.

 

This program is free to the students, and the instructors will be all volunteers, provided by the club.

Hours.

Every 1st and 3rd Saturday
9 am - 3 pm
or as scheduled

Location.

 Lebanon, Maine

If interested please Contact.

Wayne Machado 207-457-1179
waydia@metrocast.net

Loading…

New Tyres

CLICK HERE FOR DETAILS. 

Pint Tree ChapterTech Tips

Installing HeliCoil Threads

Installing HeliCoil Threads, The Restorer • November/Decemter 2003 

Remove Stuck Head

Tiny Tips From MAFCA Members Submitted by Dan Rita, Mt. Orab, Ohio Illustrated by Dick Lewis, Lawrenceburg, Indiana Safe and Easy Way to Remove A Stuck Head If you are trying to remove your Model A head and it is stuck —simply remove all head nuts, if you haven't already. Take out all spark plugs and using your hand crank tam the engine over until pistons #2 and #3 are at top dead center. A flashlight will aid in looking in the #2 and #3 spark plug holes. Take two pieces of 3/8" nylon or cotton rope, several feet long and feed one end of each rope into the #1 and #4 cylinders through the spark plug holes. Then simply use the hand crank to com-press the rope and with a little force on the crank, the head will lift right up. Try to use about the same length of rope in each cylinder so as to lift the head evenly. ..

Tiny Tech Tip fill Transmission

Tiny Tips from MAFCA Members.

Most good things start with a cup of coffee.

© 2020. All Rights Reserved.
Managed by Mayatzia Studios.